| CombiDancer ...High Speed Evaporating System |
|
CombiDancer
The compact solution you have always looked for !!! |
 |
| To process large series of samples efficiently
requires fast, variable, reproducible, gentle and environmentally-friendly
handling of the samples. Whether you use methanol, water or less volatile
solvents such as dimethylformamide (DMF) or dimethylsulfoxide (DMSO),
the CombiDancer is the ideal solution for your
laboratory.
The evaporation of solvents is an important part of sample preparation, e.g. for solid phase extraction in the analytical laboratory, in combinatorial chemistry, high throughput screening, and when employing new technologies. The operating principle of the CombiDancer involves a combination of heating, vortexing, and vacuum. Vortexing has various advantages over centrifuging. It enlarges the evaporation surface and distributes the heat evenly in the sample. There is no compression of the vapour phase. The CombiDancer can work with any vacuum pump available. However, we recommend the Vacuubrand PC 2003 VARIO diaphragm pump. The samples are heated by infrared lamps. An independent compartment heater prevents the condensation of solvents with high boiling point in the vacuum chamber. The actual temperature can be measured directly in the sample by means of a PTFE-coated temperature sensor. All parameters can be programmed and controlled separately. |
|
|
Patendeted Magnetic Drive The CombiDancer contains
no rotating parts. The samples are vortexed by a non-contact magnetic
drive. Balacing the sample is not necessary
|
Vortexing:
Heating:
Vacuum:
|
| For high volume routine operation a wide variety of sample racks are available. The CombiDancer racks are designed to accommodate most various kinds of customary sample tubes and up to four deepwell plates. All racks are made of anodized aluminum. Racks can be customized to fit your specific tube or combination of different sized tubes. |
 |
| Technical Specifications | |
| Power consumption: | 1,8 kVA |
| Maximum load: | 6 kg |
| Vortexing speed: | 200 - 1200 rpm |
| Temperature control range: | ambient to 80°C |
| Interface: | RS232 |
| Connector vacuum pump: | DN25 |
| Vacuum chamber: | stainless steel V4A, 360 mm diameter, 250 mm height |
| Weight: | approx. 80 kg |
| Dimensions: (WxDxH) | lid closed 765x695x470 mm lid open 930x695x470 mm |
| » More information? Please contact us |